Safety Training
Safety Training for 2024 is here!
Please take a look below at the course offerings that the Environmental Health and Safety department will be hosting.
Each session's location will be listed along with the time.
A few of these classes (CPR) have limits on the class size and will be handled in a "first come, first serve" basis. Other courses may have a "need" based requirement.
Please email EHS@coloradocollege.edu or lscott@coloradocollege.edu (x6678) if you have any questions or have problems with the signup form.
Sign Up
Session Descriptions
Golf Cart and LSV Safety
Dates: As required
Location: Bridge
Courses Covered
- Golf Cart and LSV Safety
THIS COURSE IS REQUIRED IF YOU WILL BE DRIVING A GOLF CART ON THE CC CAMPUS.
*NOTE:You will need to log into Bridge to view this course.
Please sign up using the form below to be added to the training.
Forklift Classroom Training
Dates: TBA
Time: 9 a.m. - 10:30 a.m.
Location: TBA
Courses Covered
- Forklift Classroom training (required as a prerequisite for the Forklift Hands-On training)
*Note: This course must be pre-approved by Facilities Management
Confined Space Entry
Dates: TBA
Time: 9 a.m. - 11 p.m. (noon)
Location: TBA
Courses Covered
- Confined Space Entry, Permitting and Safety Precautions
*Note: This course must be pre-approved by Facilities Management
Forklift Hands-On Training
Dates: TBA
Time: 8 a.m. - 12 p.m. (noon)
Location: Creekside (228 W. San Miguel St.)
Courses Covered
- Certification to drive Forklift, Aerial Manlift, Boom Lift and / or Boom Truck (manager approval required)
*Note: This course must be pre-approved by Facilities Management
CPR, First Aid, AED with Bloodborne Pathogens
Dates: July 17, 2024 - New Offering (TBD)
July 24, 2024 - New Offering (TBD)
July 31, 2024 - New Offering (TBD)
Time: 9 a.m. - 2 p.m.
Location(s):TBA
Courses Covered
- CPR, First Aid, AED (Adult and Pediatric)
- Bloodborne Pathogens
- Anaphylaxis and Epinephrine
- Nalaxone Administration (Opiod Overdose)
*NOTE: These courses will be capped at 12 people (min 2) due to licensing requirements with the Red Cross. Additional dates will be added if participation levels allow. This class is a HYBRID format requiring 4 - 6 hours of online coursework to be completed prior to the skill verification.
Respiratory Protection and Fit testing
Dates: TBA
Time: 9:00 a.m. - 11:00 a.m.
Location:
Courses Covered
- Respiratory Training/Exam/Fit Testing, 4 hours
*NOTE: A respirator is needed to participate in this course. Contact EHS to discuss Respirator procurement. Participants must pass a doctor evaluation or provide documentation showing elgibility. Participants should have a “need” based on their role with the College. Please contact EHS prior to enrolling in this course.
Lockout Tagout
Dates: TBA
Time: 9:00 a.m. - 10:30 a.m.
Location: TBD
Courses Covered
- Lockout Tagout
*Note: This course must be pre-approved by Facilities Management
OSHA 10 - Hour Outreach
Dates:
- Session 1 - 3 Hours: 9AM - 12PM
- Tuesday, June 11, 2024
- Wednesday, June 12,2024
- Thursday, June 13, 2024
- Session 2 - 3 Hours: 9AM - 12PM
- Tuesday, June 18, 2024
- Wednesday, June 19, 2024
- Thursday, June 20, 2024
- Session 3 - 2 Hours: 9AM - 11PM
- Tuesday, June 25, 2024
- Wednesday, June 26, 2024
- Thursday, June 27, 2024
- Session 4 - 2 Hours: 9AM - 11PM
- Tuesday, July 9, 2024
- Wednesday, July 10, 2024
- Thursday, July11, 2024
Location: Cornerstone: Screening Room 131
Courses Covered:
- Introduction to OSHA - 1 Hour
- Walking and working Surfaces with Fall Protection - 1 Hour
- Emergency Action Plan - 1 Hour
- Electrical Safety - 1 Hour
- Personal Protective Equipment - 1 Hour
- Hazard Communication - 1 Hour
- Bloodborne Pathogens - 1.5 Hours
- Machine Guarding - 0.5 Hour
- Asbestos - 2 Hours
The OSHA 10 Hour Outreach is intended to provide general industry workers information on how to avoid and prevent workplace injuries.
Time requirements are for 10-Hours of classroom instruction, to minimize scheduling issues this training will be broken into 4 blocks on 4 seperate days. Please make sure to attend ALL FOUR (4) classes to receive credit for the course.
Upon completion, participants will receive an OSHA 10 - Hour Card.
When signing up for this course, choose one day from each session. All four sessions MUST be attended to receive course credentials.
OSHA 30 - Hour Outreach
Dates: TBA (This course will run multiple days)
Time: 10 Days
- Day 1 - 3 Hours: 9AM - 12PM
- Day 2 - 3 Hours: 9AM - 12PM
- Day 3 - 3 Hours: 9AM - 11AM
- Day 4 - 3 Hours: 9AM - 11AM
- Day 5 - 3 Hours: 9AM - 12PM
- Day 6 - 3 Hours: 9AM - 12PM
- Day 7 - 3 Hours: 9AM - 11AM
- Day 8 - 3 Hours: 9AM - 11AM
- Day 9 - 3 Hours: 9AM - 12PM
- Day 10 - 3 Hours: 9AM - 12PM
Location: TBD
Courses Covered
- Mandatory - 12 Hours
- Introduction to OSHA - 1 Hour
- Managing Safety and Health - 2 hours
- Walking and working Surfaces with Fall Protection - 1 Hour
- Emergency Action Plan, Fire Protection - 2 Hour
- Electrical Safety - 2 Hour
- Personal Protective Equipment - 1 Hour
- Materials Handling - 2 Hours
- Hazard Communication - 1 Hour
- Elective - 10 Hours
- Bloodborne Pathogens - 1.5 Hours
- Machine Guarding - 1 Hour
- Lockout / Tagout - 2 Hours
- Powered Industrial Vehicles - 1.5 Hours (Does not include Hands-On)
- Permit-Required Confined Spaces - 2 Hours
- Ergonomics - 1 Hour
- Introduction to Industril Hygeine - 1 Hour
- Optional - 8 Hours
- Asbestos - 2 Hours
- Respiratory Protection - 2 Hours
- Lead - 2 Hours
- Silca - 2 Hours
The OSHA 30 Hour Outreach is intended to provide general industry workers information on how to avoid and prevent workplace injuries.
Time requirements are for 30-Hours of classroom instruction, to minimize scheduling issues this training will be broken into 10 blocks on 10 seperate days. Please make sure to attend ALL TEN (10) classes to receive credit for the course.
Upon completion, participants will receive an OSHA 30 - Hour card.